Pre-Nail Wall Plan

Wall Frame Plan

Describe the information that that tells you how to position the frames
•Each pre-nailed frame has a number on the top plate that corresponds to a number on the pre-nail wall plan; each frame also has a number at junction studs showing which wall is to be butted there.
What other information does it have about the timber framing?
•The Pre-nail plan has all the dimensions for the walls and the dimensions of all the windows and doors.
•The Pre-nail plan has a length of a section of wall to where an angle brace / ‘T’ section brace is to cover.
•The Pre-nail plan has all the treatments for the timber that the walls are made off, (EXT. KD H3.1 BP, H1.2 RST etc.)
Why is it supplied to builders when erecting the frames?
•It is supplied to the builder so as that they know where each individual wall goes.
•It is supplied to the builder to state that no alterations are to be made.
•It is supplied to the builder so that they know the dimensions of the walls and the rooms.
What is the ‘Disclaimer’ and what is it for
•The disclaimer state what the company’s obligations are and what they are and aren’t responsible for.
•The disclaimer state what your obligations are and what you are and aren’t responsible for.
•The disclaimer states that no alterations are to take place until the manufacturing plant has been contacted and order number issued, no claims will be recognized without the order number.
•The disclaimer states that nogs are put in to keep studs straight and aid in lining and fixing and are not to be used as an aid for climbing, and states that any damage or injury from climbing on the nogs is not the responsibility of the supplier.